STS VL5000 Depth and Level Pressure Transmitter
Submersible depth and level pressure transmitter for water monitoring, nominal 0–300 psi family ranges and selectable ±0.05/0.1/0.25% FS accuracy. Stainless steel and titanium options; output configuration and cable/corrosion protection vary by order code.
Manufacturer model specification and source
Official STS VL5000 page and model-specific technical downloads →.
Certification and SKU caution: This is an original manufacturer model-family entry, not a guarantee that every possible configuration is stocked or certified. No ATEX/IECEx approval is asserted without an actual applicable model-specific certificate and installation schedule.
VL5000 depth measurement integration
At an expected low water column, the choice between 0.05%, 0.1% and 0.25% full-scale accuracy options changes the total depth error; verify the ordered cell’s pressure span and temperature compensation. Probe cable, atmospheric reference, surge protection and suspension need a specific installation drawing. The manufacturer marks the illustration as similar, so the image is not an exact order-code photograph.
VL5000 — submersible gauge/absolute pressure options
| Measured pressure | 0–300 psi pressure-range family. |
|---|---|
| Accuracy choices | ≤ ±0.05%, ±0.1% or ±0.25% FS. |
| Output versions | 4–20 mA or voltage as purchased, with dual-current-output product versions noted by the manufacturer. |
| Construction | Fully submersible approximately 1-inch diameter; stainless steel or titanium choices. |
| Applications | Dry docks, ballast tanks, surface water, wastewater lagoons and vessel level. |
Engineering/certification: The original STS HTML page publishes an unusual temperature line (30 to +255°F paired with −2 to +125°C). Do not infer universal operating-temperature requirements from the line; check the exact VL5000 revision datasheet and cable. Gauge units need protected reference venting.
STS original manufacturer product specifications — checked 26 October 2026.