EMS Kontrol HT-2XX
EMS Kontrol HT-2XX transmitter family for air velocity measurement and building or industrial monitoring applications.
Product Overview
This page represents a manufacturer series, not a single confirmed order code. Select a version appropriate for the intended measurement location and application.
Technical Specifications
- Measured parameter: Air Velocity
- Primary sensing principle: Refer to the official series datasheet; do not infer technology from the code.
- Measurement range and accuracy: Exact variant must be confirmed.
- Output and supply: Order-code dependent; confirm with EMS Kontrol.
- Installation: Follow manufacturer instructions for placement, wiring, calibration and maintenance.
Manufacturer-Verified Specifications
| Air velocity range | 0–10 m/s; HT-202 variant 0–5 m/s |
|---|---|
| Specified accuracy | ±0.2 m/s |
| Sensitivity | ±0.1 m/s |
| Power | 24 V DC; 12 V DC for HT-202 |
| Signals | 0–5 V / 0–10 V / 4–20 mA / Modbus RTU depending on model |
| Sensing mechanism | Manufacturer’s reviewed catalogue does not explicitly identify hot-film or hot-wire technology |
Engineering and Selection Considerations
Confirm range, signal interface, operating environment, measurement accuracy, certification and availability for the exact model. For critical safety applications check the relevant approvals and independent requirements.
Manufacturer and Official Resources
Related AirAlign Content
Browse Air Velocity Transmitters → · Transmitter Buying Guide →
AirAlign independent manufacturer/product reference. Model-specific documentation is authoritative.
HT-2XX — air-velocity transmitter measurement location
HT-2XX is the EMS air velocity transmitter family. Air speed measurement is sensitive to location and duct flow profile, so specify probe insertion, alignment with actual flow direction, upstream disturbance distance and a practical calibration point. An air velocity reading in m/s must not be reported as volume flow without duct area and a validated flow profile/traverse relationship. Verify the probe’s measuring range, media temperature limit and controller output from the actual manufacturer suffix rather than borrowing a differential-pressure flow transmitter’s specification.