General Life CERES HT16S RF
CERES HT16S RF is a General Life wireless room thermostat. The room unit communicates with a separate RF receiver, which switches compatible equipment through its relay.
Model Identification
Manufacturer: General Life
Series: CERES
Model: HT16S RF
Category: Wireless room thermostat
Connection: Radio link to receiver; receiver relay to equipment
Room Thermostat Specifications
Receiver Specifications
Compatibility and Installation
Confirm that the heating or cooling equipment supports the receiver’s on/off relay connection, and follow the exact equipment and thermostat manuals. The RF link replaces the cable between room unit and receiver; the receiver still needs power and an equipment connection. Electrical installation should be performed by a qualified installer.
Source and Revision Notes
The individual product page could not be retrieved. Technical data is sourced from an official shared RF manual that explicitly includes this model and the CERES series. Receiver ambient operating temperature is not stated in that manual.
Related Pages
Wireless thermostats · CERES series · General Life manufacturer
Official Resources
Technical data checked against the official shared RF manual that explicitly includes this model and series on 11 October 2026.
Official Model-Family RF User ManualOfficial Wireless Catalog
AirAlign is an independent informational resource and is not affiliated with General Life.
CERES HT16S RF: model-specific RF commissioning notes
Physical split: The thermostat unit is 85.7mm / 85.7mm / 30.1mm and uses 3V DC (2 x AAA alkaline batteries); the supplied receiver is listed as 90mm / 90mm / 25mm with 230V AC. These are separate circuits; the room unit’s battery supply must not be connected to the receiver’s mains terminals.
Switch output: The receiver’s normally-open contact is stated as 7A at 240VAC; 10A at 120VAC under resistive conditions. Identify the building heating unit’s thermostat input, any needed isolation and inductive-load restrictions before using that relay to switch equipment.
Control behavior: The recorded room setpoint window is (5°C) – (30°C), with (-2.0°C) – (+2.0°C) sensitivity. A negative-to-positive setting range does not prove ±2°C sensing accuracy. Test actual RF signal quality, pairing, signal-failure response and manual receiver behavior at the installation site.
Order-specific checks: CERES HT16S RF RF is not interchangeable with the same series wired model purely by appearance. Verify exact receiver, electrical terminals and manufacturer revision in the linked official instructions.