Industrial Scientific Tango TX2 Dual-Gas Monitor
Wearable two-gas detector with independent sensing, manufacturer states a two-year runtime.
Original manufacturer: Industrial Scientific.
Original model and instrument configuration approval must be verified before any hazardous-area specification. Wireless accessories, chargers and monitoring accessories may have separate limitations.
Official Source
Industrial Scientific official multi-gas portfolio →
Tango TX2 — two distinct gases and runtime basis
Tango TX2 adds a second monitored gas relative to TX1; selection must start with the permitted two-gas combination and corresponding test cylinders. The manufacturer’s two-year runtime claim is tied to defined battery, sensor and use conditions, so verify for the exact purchased unit. Individual sensor end-of-life, calibration intervals and alarm thresholds need separate handling. Do not transfer TX1 redundancy claims to a TX2 merely because both are Tango-branded.
Tango TX2 — two independent electrochemical sensors
| Technology | Two gas-selective electrochemical cells, field-replaceable according to model’s supported sensors, including CO, H₂S, HCN, NH₃, SO₂ and NO₂. |
|---|---|
| Physical | 99 × 51 × 35 mm, approximately 126 g; operational −40…+50°C, 15–95% RH non-condensing. |
| Alerts | Three high-visibility strobes, vibration and 100 dB sound at 10 cm. |
| Battery | Primary lithium-thionyl-chloride replaceable battery; up to 2 years depending on conditions. It is non-rechargeable. |
| Host behavior | Display can alternate sensors; alarm forces display switching. Instrument support warranty excludes sensors, battery and filters. |
Integration and safety note: Not every sensor combination is suitable for every hazard; check gas/cross-sensitivity and alarm setpoints. Do not claim a rechargeable power supply or always-on wireless/iNet data service for a standard Tango TX2.
Original manufacturer technical information — checked 26 October 2026.