X-CUBE X2 compact
Preconfigured compact air handling system for small and medium applications.
Product Family Overview
Manufacturer: TROX
AHU family: X-CUBE X2 compact
Product application: Preconfigured compact air handling system for small and medium applications.
Engineering and Selection Considerations
Confirm the selected AHU configuration, airflow and pressure, fan arrangement, filter specification, heat recovery selection, heating and cooling coil capacities, casing construction, corrosion exposure, hygiene requirements and BMS integration. Configurable series can differ substantially from project to project; refer to the manufacturer’s project selection output.
Official Manufacturer Reference
AHU product information and technical documentation →
Independent AirAlign AHU series profile. Actual performance depends on ordering and design configuration, and regional availability may vary.
X-CUBE X2 compact — access in limited plant space
X-CUBE X2 compact is a preconfigured compact TROX AHU family for smaller or medium projects. A cabinet that fits a ceiling or tight plant space may still lack the side access required for filter removal, coil cleaning and fan replacement. Check the selected unit’s airflow at total pressure, noise and heat-recovery/frost options and compare the available configurations with the more flexible X-CUBE. Do not imply every X-CUBE accessory is bundled with the X2 compact variant.
X-CUBE X2 compact — distinguish the three arrangements
| Selection point | Official model data and interpretation |
|---|---|
| Vertical rotary configuration | Indoor arrangement with top duct connections; airflow 600–5,200 m³/h on the published TROX overview. |
| Horizontal rotary configuration | Indoor/outdoor side connections; airflow 600–15,200 m³/h. Rotary heat recovery may transfer moisture and trace carry-over depending on rotor type and sealing. |
| Horizontal plate configuration | Indoor/outdoor side connections; airflow 600–10,200 m³/h. Plate heat exchanger prevents the direct rotor carry-over mode and differs in frost/condensate design. |
| Equipment selection | The three envelope maxima are different: do not cite 15,200 m³/h as a universal vertical or plate configuration capacity. |
| Control and engineering | Web X-CUBE Configurator provides project-specific dimensioning and operating-cost evaluation; selected size, fan curve and heat-recovery equipment control installed performance. |
This is the preconfigured compact sub-family, distinct from freely configured X-CUBE X2. Specify layout and rotor/plate type first, then verify static pressure, service zones, climate, energy recovery and acoustics.
TROX X-CUBE X2 compact variant airflow matrix. Original manufacturer documentation, reviewed 26 October 2026.