LEFOO LFEMF-G Electromagnetic Liquid Flowmeter
Model-specific technical information follows the manufacturer’s original product listing. Every range, interface, wetted material, option, configuration and regional approval must be checked against current ordered documents.
Manufacturer-published specifications
| Principle | Conductive liquid bi-directional electromagnetic flow, DN15–DN1200 maker product table |
|---|---|
| Minimum conductivity | ≥30 µS/cm |
| Accuracy | 0.5% manufacturer family rating |
| Output | 4–20 mA and RS485 standard; HART optional |
| Power | 24VDC ±20% or 85–250VAC |
| Enclosure | IP65 integral, or separate sensor IP68 and converter IP65 |
| Configuration discrepancy | Manufacturer product table DN15–DN1200, maker technical article DN15–DN1000: order-specific sizes must be reconfirmed |
Original LEFOO LFEMF-G model page and technical documentation · Official manufacturer document library
LFEMF-G — conductivity and source dimension mismatch
LFEMF-G uses electromagnetic measurement for conductive liquids; dry gas and low-conductivity oil are unsuitable application assumptions. LEFOO’s product table and one technical article list different upper bore ranges (DN1200 versus DN1000), which must be reconciled for the actual selected meter. Confirm process lining, electrode material, conductivity above 30 µS/cm, supply and whether HART is installed. Meter body IP65 and submerged separate-body IP68 are not interchangeable enclosure ratings.