BAPI FRP Fixed Range Differential Pressure Sensor
Original manufacturer: BAPI — Building Automation Products, Inc.
Three visible pressure-status LEDs; not field range-selectable. The official current 2026 product catalog lists this distinct model/family.
| Range / configuration | Pressure range and output selected at order |
|---|---|
| Accuracy or equipment type | Confirm order-specific data sheet |
| Hazardous area certification | No ATEX/IECEx Ex protection is claimed for this model in the referenced BAPI catalog. |
Original Manufacturer Documentation
BAPI official model details and download links →
BAPI 2026 Complete Product Catalog →
Selectable configurations vary by ordering code. This model/family listing does not stand for every purchaseable SKU.
BAPI FRP order-specific range
The fixed-range FRP sensing family should be ordered for the correct pressure span and output; status LEDs are diagnostics, not proof of selectable full scale. Verify the actual order code and BMS input type before commissioning. A field-selectable ZPM family is not necessarily a pin-compatible replacement. Confirm static pressure, hose connection and calibration checks for the application.
FRP — factory-selected span/output, not the field-switchable ZPM
The FRP is BAPI’s economy fixed-range differential-pressure sensor for commercial HVAC systems. The key purchasing distinction is that the instrument is configured for one pressure span and one signal output at the factory: the ZPM model’s selectable configurations cannot be assumed for FRP.
| Specification | BAPI data | Technical selection note |
|---|---|---|
| Range and signal | One ordered fixed pressure range and one factory-set output | Select by actual filter/duct DP span and BMS input range. Range and output are not field-selectable on this family. |
| Indication and zero | Three pressure-status LEDs and one autozero push button | Status LEDs are not an accurate continuous pressure register; perform proper zero procedure after mechanical installation. |
| Enclosure use | BAPI-Box with optional attached static pressure tube | Check the ordered pressure-tube fitting, ingress seals and actual environmental rating rather than inferring outdoor Ex protection. |
| Model alternatives | Standard field-selectable ZPM or precision ZPM sold separately | Swapping a FRP with a ZPM requires signal scaling, enclosure and cable checks even when mounting looks similar. |
| Manufacturer documentation | Maker offers model datasheet and installation/operation guide | Verify order code and temperature-dependent accuracy from current OEM submittal rather than applying a generic ZPM percentage. |
Instrument approval and exact option code
Pressure measurement, switching, zero setting, accuracy and housing approvals are variant-specific. IP66/NEMA 4 is not an ATEX/IECEx certification. Confirm the exact BAPI ordered part number, output interface, current electrical connection, calibration evidence and tubing installation before a safety or purchase decision.
OEM model source: BAPI FRP Fixed Range Differential Pressure Sensor.