BD|SENSORS CIT 700 / 750

Manufacturer: BD|SENSORS. Products & Manufacturers

Process display and logger. Values below are manufacturer family specifications; ranges and options differ by ordering code.

Technical specifications

Device class	Multichannel process display and data logger
Interface	Modbus options; verify variant
Display	Touchscreen

Official technical documentation

Manufacturer technical source / datasheet ↗

Source reviewed: 17 October 2026. Exact SKU specifications, certifications and ordering options must be verified before product selection.

CIT 700/750 — data acquisition rather than gas sensing

CIT 700 and 750 are process indicators/loggers and should be specified by input-channel type, isolation, acquisition speed and communications rather than a pressure range of their own. Confirm whether the chosen display supports the installed transmitters’ 4–20 mA, voltage or Modbus channels and the expected timestamp/record retention. Alarm processing and log export are configuration-dependent. These devices are not pressure/gas sensors or independent hazardous-area-approved safety systems simply because they display process values.

CIT 700 versus CIT 750 — channels, sample rate and enclosure sealing — original technical reference

Model-specific measurement and electrical figures, output options and their source limitations.

Measured feature	Maker data	Practical engineering implications
Primary class	Programmable multichannel process display/logger and controller	Displays connected transmitter signals; does not itself sense gas or pressure.
Screen contrast	CIT 700 3.5-inch TFT in 96×96mm front; CIT 750 5.7-inch TFT in 144×144mm front	These are two physically different panel-cutout sizes.
Acquisition	Up to 60 logged channels, max 10 Hz sampling; additional calculated/IO channels up to 90	A 90 logical-channel ability is not 90 analogue terminals on a base device.
Internal storage	1.5 GB internal memory	Retention length depends on recording channel count and frequency.
Hardware expansion	Three configurable input/output slots and modular I/O selection	The exact analog current/RTD/pulse contacts depend on inserted modules.
Logic/control	35 mathematical/logic functions and eight PID controllers with autotuning	A process PID is not automatically a certified fire/gas safety shutdown device.
Physical ports	RS485 Modbus RTU, RS232, USB host, Ethernet Modbus TCP by configuration	Connectivity options require installed interface modules/firmware.
Auxiliary field power	24 V DC transducer power output	Calculate connected pressure transmitter load before relying on internal supply.
Ingress	IP65 front panel on appropriately sealed cut-out; rear housing/connectors IP20	Do not call a panel-mounted whole device IP65 inside wet cabinet.
Environment	0–50 °C standard with optional extended ambient version	Confirm actual SKU, panel venting and condensation management.

System selection and verification

The same operator display family covers data acquisition and logic, but the CIT 700 and CIT 750 have materially different panel dimensions. The original BD|SENSORS product sheet lists up to 60 logged channels and 10Hz logging, whereas up to 90 I/O/logic channels are virtual/configuration architecture and not 90 built-in physical connections. In a pressure-monitoring panel, select actual input modules, overrange/fault and sensor excitation, then separate process control PID from independently approved protection functions. The front enclosure has IP65 only under the specified sealing arrangement; rear terminals are IP20.

Primary official specification: Model manufacturer technical documentation. Order suffixes, current revisions, traceable calibration and certifications are subject to final confirmation.

AirAlign manufacturer-specific editorial enhancement · 25 October 2026. Not independent source calibration, site regulatory signoff or finished-safety-instrument certification.